کنترلر سری Power N

Power N 15 Inch XGA
  • TFT XGA 1024×768 pixel display without  touch screen
  • 80-key thermoformed membrane keypad
  • Door for access to Ethernet, USB ans CF memory
  • Mushroom-head emergency button
  • Electronic handwheel with axis
  • Selector and Movement resolution
  • Selector (optional)
  • OverfeedPotentiometers (optional)
  • Dimensions 434x400x160 (WxHxD in mm)

Power N 15 Inch XGA
  • TFT XGA 1024×768 pixel display with or without  touch screen
  • 80-key thermoformed membrane keypad
  • Door for access to CF
  • Mushroom-head emergency button
  • Dimensions 490x400x160 (WxHxD in mm)

​Power N 15 Compact 28 key

  • TFT XGA 1024×768 pixel display with or without  touch screen
  • 28-key thermoformed membrane keypad
  • USB socket
  • Dimensions 400x355x160 (WxHxD in mm)
  • Supply 24 Vdc
  • Flash eprom for firmware:6 MB (7MB optional)
  • Ram Memory:  8MB
  • Cpu 264 Mhz- 32 bit
  • 52 digital inputs pnp – npn 24 Vdc (can be expanded)
  • 33 protected outputs pnp 1 Amp. 24 Vdc (can be expanded)
  • 8 PWM output
  • 8 pulse direction outputs (with optional board, alternative to PWM outputs)
  • 8 analog outputs +/- 10 V a 14bit. (can be expanded to 16)
  • 8 encoder inputs 500Khz – 5V Push Pull (can be expanded to 16)
  • 4 analog inputs 0-10 V. 12 bit (can be partitioned with trimmer)
  • 4 analog inputs 0-5 V. 12 bit
  • 1analog inputs 0-10 V  a 12 bit
  • 2 Serials RS 232 (on request, one can be converted in RS485)
  • 3 CAN open ports
  • 1 Ethernet port TCP 10-100 (can be expanded to 2)
  • Clock
  • XGA graphic control with connector for remote terminal
  • Keypad interface up to 75 Keys
  • Touch screen
  • External Flash: 8MB
  • Buffered SRAM: Up to 8 MB
  • Serial Flash: Up to 16 MB
  • Expansion connector for mechatrolink or secend ethernet

 

ادامه مطلب

کنترلر سری Power F

Power F 10.4 Inch Compact
    • TFT SVGA 800×600 pixel display with touch screen
    • 16-Key thermoformed membrane keypad
    • IP65 USB socket
    • Dimensions 290x270x100 (WxHxD in mm)
 

Power F 10.4 Inch XGA ISO Touch
  • TFT XGA display (1024×768) with touch screen
  • 80-key thermoformed membrane keypad
  • Door for access to Ethernet, USB and CF memory
  • Mushroom-head emergency button
  • Electronic handwheel with axis
  • Selector and movement resolution
  • Selector and movement resolution
  • Selector (optional)
  • Overfeed potentiometers (optional)
  • Dimensions 434x400x160 (WxHxD in mm)

 

Power F Passive Mobile Terminal 10 inch 
(sold with Power E box)
  • Ergonomic plastic case
  • Connection to Power N Box by means of 36-pole LVDS cable up to 5m. long
  • Display TFT WSVGA 1024×600 pixel with touch screen
  • 4-Key Keypad
  • Dual-contact mushroom-head emergency button
  • Optional “dead man” button
Power F BOX
  • Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)​

 

TECHNICAL FEATURES​
    • Supply 24 Vdc
    • Flash eprom for firmware: 8 MB
    • Ram Memory:  8MB
    • Cpu 256 Mhz- 32 bit RISC
    • 32 digital inputs pnp – npn 24 Vdc (can be expanded)*
    • 24 protected outputs pnp 1 Amp. 24 Vdc (can be expanded)*
    • 4 PWM output
    • 4 analog outputs +/- 10 V ( 14bit)
    • 4 analog inputs 0-5 V. 12 bit (on connector for flat cable)
    • 3 analog inputs 0-5 V. 12 bit (on terminal board)
    • 1 analog input +/- 10 V. 12 bit (on terminal board)
    • 4 encoder inputs 5 V. Push Pull – 1 Mhz (10 Mhz without filters)
    • 3 encoder inputs 5 V. Line driver – 1 Mhz (10 Mhz without filters)
    • 2 Serial ports RS 232 (1 can be converted in RS485)
    • 2 CAN open ports
    • 2 Ethernet ports 10/100 (one reserved for Ethercat net)
  • *Inputs and outputs can have a different 
ادامه مطلب

کنترلر سری Power E

 

Power E 10.4 Inch Compact
  • TFT SVGA 800×600 pixel display with touch screen
  • 16-Key thermoformed membrane keypad
  • IP65 USB socket
  • dimensions 290x270x100 (WxHxD im mm)

        

Power E 10.4 Inch XGA ISO Touch ​
  • TFT XGA display (1024×768) with touch screen
  • 80-Key thermoformed membrane keypad
  • door for access to Ethernet, USB and CF memory
  • mushroom-head emergency button
  • electronic handwheel with axis
  • selector (optional)
  • overfeed potentiometers (optional)
  • dimensions 434x400x160 (WxHxD in mm)

 

 

Power E 15 Inch Compact

  • TFT XGA 1024×768 pixel display with touch screen
  • Dimensions 398x296x100 (WxHxD in mm)
  
Power E Passive Mobile Terminal 10 inch 
(sold with Power E box)
  • Ergonomic plastic case
  • Connection to Power N Box by means of 36-pole LVDS cable up to 5m. long
  • Display TFT WSVGA 1024×600 pixel with touch screen
  • 4-Key Keypad
  • Dual-contact mushroom-head emergency button
  • Optional “dead man” button
Power E Box
  • Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)

 

THE POWER FAMILY OF PAC CONTROLLERSGeneral Information

The acronym PAC, which stands for Programmable Automation Controller, is assuming more and more importance in the field of Industrial Automation since it expresses the ability of the controller to integrate the four fundamental aspects of modern automation:

As you can imagine from the figure, the PAC performs the tasks that were usually assigned to multiple control devices, fully integrating into a single system the following features:

PLC – Programmable Logic Controller: is the operational part of the system (task) that handles the logic of the machine

HMI – Human Machine Interface: is the area dedicated to the exchange of information between the operator / maintainer and the machine

MC – Motion Controller: allows the deterministic management of all trajectories of motion of the axes, cadenced in time intervals exactly repeatable, coordinating their movements in order to achieve predefined complex movements

IT – Information Technology: expresses the ability of the controller to be able to integrate perfectly into the information structure of the factory hosting the machine

The Power family includes a series of PAC scalable in performance and in size.

The most common characteristics of the controllers are:

Possibility of controlling servomotors, with feedback from incremental or absolute encoder, through I/O signal or via motion fieldbus; axe’s interpolation (linear circular, helical, NURBS spline), gearing, camming and kinematics functions for articulated robotic arms (both sequential or parallel kinematic), etc.

Integrated function for tool machines (tool correction, entry and exit functions, generation of profiles, bevelling management, RTCP – Rotating Tool Center Point, etc.)

    • Analog and digital I/O managing, both local and remote (via fieldbus)
    • CNC with high-level programming language, function block library, concurrent execution of multiple tasks
    • Interpreter for ​​ISO languages (for the geometric machining of the pieces) and Macro language (for handling and robotic applications)
    • PLC divided into sections, with some integrated MC functionality, the ability to perform multiple tasks simultaneously and to process instructions also in interrupt
    • Ability to process consistent arrays of data (database) stored in 32-bit FAT file system
    • Management of graphical color display with touch screen, sizes between 5.7 “and 15”.
    • Serial ports RS232/485
    • USB 2.0 port for connecting peripherals such as mouse, keyboards and solid state memory devices
    • Field bus CANopen, Mechatrolink II, EtheCAT, Modbus
    • Ethernet port for interfacing to external devices via communication protocols TCP/IP, FTP, Modbus TCP, and with the free availability of the OPC Server (Host side) and Web Server (Controller side) functions.
    • Removable storage media Compact Flash or USB PenDrive
    • PLC, CNC and HMI programming with compiler on board; the source files, in text format, are directly editable on the controller or can be transmitted to the controller via serial or Ethernet.

 

Multitasking PLC, with the ability to execute instructions in interrupt. Programming Languages: AWL, ST (Structured Test) and SFC (Sequential Function Chart), with the support of alias (local and global) and motion functions like Jog, Point movements, E-Gear or E-Cam.

 

Multi-Channel CNC, with RTCP (Rotating Tool Center Point) direct/revers kinematic functions and path pre-executor (look-ahead). Programming language: ST (Structured Test) with FB (Function Block), ISO interpreter and MDI (Manual Direct Input) executor. Type of interpolation: liner, circular, helical, nurb, splines, profiling. Imports of ISO programs from CAD/CAM; their execution is possible even in DNC (Direct Numerical Control).

 

Power Full test and diagnoxtic Tools:

You can Monitor many thing trough test Window Online trough Controller Interface

 

 

On Board Power Full Osiloscope

A multi-trace (up to 8) oscilloscope window is shown, where it is possible to display several quantities about axes

 

AXES STATUS

It shows the status of the axes.

 

Soft Ware

 

 

  • TECHNICAL FEATURES
    • Supply 24 Vdc
    • Flash eprom for frrmware: 4 MB
    • Ram Memory:  4MB (8MB optional)
    • Cpu 132 Mhz- 32 bit RISC
    • 32 digital inputs pnp – npn 24 Vdc (can be expanded)
    • 24 protected outputs pnp 1 Amp. 24 Vdc (can be expanded)
    • 4 PWM output
    • 4 analog outputs +/- 10 V ( 14bit)
    • 8 analog inputs 0-5 V. 12 bit (on connector for flat cable)
    • 3 analog inputs 0-5 V. 12 bit (on terminal board)
    • 1 analog input +/- 10 V. 12 bit (on terminal board)
    • 4 encoder inputs 5 V. Push Pull – 1 Mhz (10 Mhz without filters)
    • 2 encoder inputs 5 V. Line driver – 1 Mhz (10 Mhz without filters)
    • 2 Serial ports RS 232 (1 can be converted in RS485)
    • 2 CAN open ports​
    • 2 Ethernet ports 10/100 (one reserved for Ethercat net)

 

ادامه مطلب

کنترلر سری Power K

کنترلر سری Power K

دارای 4 محور آنالوگ با فیدبک انکدر، 4 محور پالس حلقه باز و یک محور انکدر اضافه برای Handwheel و همچنین 2 عدد پورت CanOpen برای کاربرد در ماشین‌آلات ابزار، تراش، چوب، بسته‌بندی، ماشین های مخصوص، هواگاز- پلاسما و سایر ماشین‌آلات صنعتی بسیار مناسب می‌باشد.

سایز مانیتور از 10 تا 15 اینچ با طراحی‌های متفاوت در حالت Compact و یا BOX نصب این کنترلرها را بسیار آسان نموده است.

نرم‌افزار قدرتمند و زبان برنامه‌نویسی ساختار یافته به طراح قابلیت طراحی پیچیده‌ترین کاربردها را می‌دهد.

Power K 10 Inch Touch Panel​
  • TFT WSVGA display, format 16:9 (1024×600 pixel) with touch screen
  • USB socket
  • Dimensions 310x192x60 (LxHxP in mm)

      

 

Power K 10 Inch 56 keys ​
  •  TFT WSVGA display (1024×600 pixel) with touch screen
  •  56 Keys thermoformed membrane keypad
  •  USB socket
  •  Dimensions 310x300x60 (WxHxD in mm)

Power K 10 Inch Passive Mobile Terminal

(sold with Power K box)

  • Ergonomic plastic case
  • Connection to Power N Box by means of 36-pole LVDS cable up to 5m. long
  • Display TFT WSVGA 1024×600 pixel with touch screen
  • 4-Key Keypad
  • Dual-contact mushroom-head emergency button
  • Optional “dead man” button
Power K BOX
  • Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)​​
  
 

Power K 10 Inch 54 Key

  • TFT WSVGA display (1024×600 pixel) with touch screen
  • 56 Keys thermoformed membrane keypad
  • USB socket
  • Dimensions 310x300x60 (WxHxD in mm)​
Power K BOX
  • ​​Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)​​
 

 
Power K 15 Inch Touch Panel
  • ​TFT WSVGA display, format 16:9 (1024×600 pixel) with touch screen
  • USB socket
  • Dimensions 310x192x60 (LxHxP in mm)
Power K BOX
  • Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)​​
 
Power K 15 Inch Touch Panel
  • TFT XGA 1024×768 pixel display with touch screen
  • Dimensions 398x296x100 (WxHxD in mm)
Power K BOX
  • Fixing from inside panel
  • Dimensions 275x251x65 (WxHxD in mm)​​​

کنترلر‌های سری پاور کنترلرهای چند پروسه‌ای (Multitasking)

قابلیت اجرای همزمان چند برنامه با همدیگر را دارا می باشند.
برنامه توسط فایل های متعددی که قبلا کامپایل شده‌اند و سپس توسط سیستم عامل بارگذاری می‌شوند به اجرا در می‌آیند.
یک بخش مخصوص تصحیح متون می‌تواند در حین کار، برنامه را بدون نیاز به کامپیوتر ویرایش نماید.

As you can imagine from the figure, the PAC performs the tasks that were usually assigned to multiple control devices, fully integrating into a single system the following features:

PLC – Programmable Logic Controller: is the operational part of the system (task) that handles the logic of the machine

HMI – Human Machine Interface: is the area dedicated to the exchange of information between the operator / maintainer and the machine

MC – Motion Controller: allows the deterministic management of all trajectories of motion of the axes, cadenced in time intervals exactly repeatable, coordinating their movements in order to achieve predefined complex movements

IT – Information Technology: expresses the ability of the controller to be able to integrate perfectly into the information structure of the factory hosting the machine

The Power family includes a series of PAC scalable in performance and in size.

The most common characteristics of the controllers are:

Possibility of controlling servomotors, with feedback from incremental or absolute encoder, through I/O signal or via motion fieldbus; axe’s interpolation (linear circular, helical, NURBS spline), gearing, camming and kinematics functions for articulated robotic arms (both sequential or parallel kinematic), etc.

Integrated function for tool machines (tool correction, entry and exit functions, generation of profiles, bevelling management, RTCP – Rotating Tool Center Point, etc.)

    • Analog and digital I/O managing, both local and remote (via fieldbus)
    • CNC with high-level programming language, function block library, concurrent execution of multiple tasks
    • Interpreter for ​​ISO languages (for the geometric machining of the pieces) and Macro language (for handling and robotic applications)
    • PLC divided into sections, with some integrated MC functionality, the ability to perform multiple tasks simultaneously and to process instructions also in interrupt
    • Ability to process consistent arrays of data (database) stored in 32-bit FAT file system
    • Management of graphical color display with touch screen, sizes between 5.7 “and 15”.
    • Serial ports RS232/485
    • USB 2.0 port for connecting peripherals such as mouse, keyboards and solid state memory devices
    • Field bus CANopen, Mechatrolink II, EtheCAT, Modbus

​واحد IT  تعبیه شده در این کنترلر باعث شده که بتوان این کنترلر را در شبکه IT کارخانه قرار داده و در کاربردهای  ســوپروایزری(SCADA) قرار داده و مدیریت روی داده های ماشـین انجام داده و همـچنین کنترل بهتری روی خط تولید داشـته باشیم. داشـتن قابلیت OPC Server و WEBserver این کنترلر را برای کنترل از راه دور بسیار مناسب کرده است.

  • Removable storage media Compact Flash or USB PenDrive
  • PLC, CNC and HMI programming with compiler on board; the source files, in text format, are directly editable on the controller or can be transmitted to the controller via serial or Ethernet.

 

Multitasking PLC, with the ability to execute instructions in interrupt. Programming Languages: AWL, ST (Structured Test) and SFC (Sequential Function Chart), with the support of alias (local and global) and motion functions like Jog, Point movements, E-Gear or E-Cam.

 

Multi-Channel CNC, with RTCP (Rotating Tool Center Point) direct/revers kinematic functions and path pre-executor (look-ahead). Programming language: ST (Structured Test) with FB (Function Block), ISO interpreter and MDI (Manual Direct Input) executor. Type of interpolation: liner, circular, helical, nurb, splines, profiling. Imports of ISO programs from CAD/CAM; their execution is possible even in DNC (Direct Numerical Control).

 

Power Full test and diagnoxtic Tools:

You can Monitor many thing trough test Window Online trough Controller Interface

 

 

On Board Power Full Osiloscope

A multi-trace (up to 8) oscilloscope window is shown, where it is possible to display several quantities about axes

 

AXES STATUS

It shows the status of the axes.

 

ادامه مطلب

کنترلر سری Power L

کنترلر سری Power L

با داشتن دو محور Close Loop ( حلقه بسته) و داشتن 4 محورOpen Loop (حلقه باز) جمعا دارای 6 محور می‌باشد.

 صفحه نمایش 5.7 اینچ تا 7 اینچ این کنترلر را برای کابردهای بسیار زیادی مناسب کرده است. ماشین‌آلات برش هواگاز پلاسما، پانچ، بسته بندی، چاپ و سلفون همگی توسط این کنترلر قابل راه‌اندازی می‌باشند.

از طریق پورت CAN شما می‌توانید تعداد 6 محور سروو موتور را با این کنترلر راه‌اندازی نمایید.

 

 

Power L 7 Inch Touch Panel

​ ​TFTWVGA display, format 15:9 (800×480 pixel) touchscreen

USB socket

Dimensions 243x146x82 (WxHxDin mm)

  
Power L 5.7 Inch Touch Panel

TFT VGAdisplay (640×480 pixel) touchscreen

USB socket​

Power L 7 Inch

​ ​TFTWVGA display, format 15:9 (800×480 pixel) touchscreen

USB socket

Dimensions 243x146x82 (WxHxDin mm)

  
Power L BOX
  • Dimensions 174x157x83 (WxHxD in mm)

 

 

 

کنترلر‌های سری پاور کنترلرهای چند پروسه‌ای (Multitasking)

قابلیت اجرای همزمان چند برنامه با همدیگر را دارا می باشند.
برنامه توسط فایل های متعددی که قبلا کامپایل شده‌اند و سپس توسط سیستم عامل بارگذاری می‌شوند به اجرا در می‌آیند.
یک بخش مخصوص تصحیح متون می‌تواند در حین کار، برنامه را بدون نیاز به کامپیوتر ویرایش نماید.

As you can imagine from the figure, the PAC performs the tasks that were usually assigned to multiple control devices, fully integrating into a single system the following features:

PLC – Programmable Logic Controller: is the operational part of the system (task) that handles the logic of the machine

HMI – Human Machine Interface: is the area dedicated to the exchange of information between the operator / maintainer and the machine

MC – Motion Controller: allows the deterministic management of all trajectories of motion of the axes, cadenced in time intervals exactly repeatable, coordinating their movements in order to achieve predefined complex movements

IT – Information Technology: expresses the ability of the controller to be able to integrate perfectly into the information structure of the factory hosting the machine

The Power family includes a series of PAC scalable in performance and in size.

The most common characteristics of the controllers are:

Possibility of controlling servomotors, with feedback from incremental or absolute encoder, through I/O signal or via motion fieldbus; axe’s interpolation (linear circular, helical, NURBS spline), gearing, camming and kinematics functions for articulated robotic arms (both sequential or parallel kinematic), etc.

Integrated function for tool machines (tool correction, entry and exit functions, generation of profiles, bevelling management, RTCP – Rotating Tool Center Point, etc.)

    • Analog and digital I/O managing, both local and remote (via fieldbus)
    • CNC with high-level programming language, function block library, concurrent execution of multiple tasks
    • Interpreter for ​​ISO languages (for the geometric machining of the pieces) and Macro language (for handling and robotic applications)
    • PLC divided into sections, with some integrated MC functionality, the ability to perform multiple tasks simultaneously and to process instructions also in interrupt
    • Ability to process consistent arrays of data (database) stored in 32-bit FAT file system
    • Management of graphical color display with touch screen, sizes between 5.7 “and 15”.
    • Serial ports RS232/485
    • USB 2.0 port for connecting peripherals such as mouse, keyboards and solid state memory devices
    • Field bus CANopen, Mechatrolink II, EtheCAT, Modbus

​واحد IT  تعبیه شده در این کنترلر باعث شده که بتوان این کنترلر را در شبکه IT کارخانه قرار داده و در کاربردهای  ســوپروایزری(SCADA) قرار داده و مدیریت روی داده های ماشـین انجام داده و همـچنین کنترل بهتری روی خط تولید داشـته باشیم. داشـتن قابلیت OPC Server و WEBserver این کنترلر را برای کنترل از راه دور بسیار مناسب کرده است.

  • Removable storage media Compact Flash or USB PenDrive
  • PLC, CNC and HMI programming with compiler on board; the source files, in text format, are directly editable on the controller or can be transmitted to the controller via serial or Ethernet.

 

Multitasking PLC, with the ability to execute instructions in interrupt. Programming Languages: AWL, ST (Structured Test) and SFC (Sequential Function Chart), with the support of alias (local and global) and motion functions like Jog, Point movements, E-Gear or E-Cam.

 

Multi-Channel CNC, with RTCP (Rotating Tool Center Point) direct/revers kinematic functions and path pre-executor (look-ahead). Programming language: ST (Structured Test) with FB (Function Block), ISO interpreter and MDI (Manual Direct Input) executor. Type of interpolation: liner, circular, helical, nurb, splines, profiling. Imports of ISO programs from CAD/CAM; their execution is possible even in DNC (Direct Numerical Control).

 

Power Full test and diagnoxtic Tools:

You can Monitor many thing trough test Window Online trough Controller Interface

 

 

On Board Power Full Osiloscope

A multi-trace (up to 8) oscilloscope window is shown, where it is possible to display several quantities about axes

 

AXES STATUS

It shows the status of the axes.

 

ادامه مطلب