آدرس

  • خیابان سعدی , کوچه ترابی , خانه اینورتر ایران
    دفتر خدمات : شهر قدس , خیابان انقلاب , پلاک 151
  • در تماس باشید
    info@deltaltd.ir
تلفن021-46845005

Industrial FieldbusSolutions

  1. خانه
  2. Industrial FieldbusSolutions

IFD8510

‧A serial signal regenerator
‧Extends RS-422/485 transmission to 1.2km
‧Connectable to 32 RS-485 devices
‧Isolation in RS-485 channel (incl. power supply)
A serial signal regenerator
Extends RS-422/485 transmission to 1.2km
Connectable to 32 RS-485 devices
Isolation in RS-485 channel (incl. power supply)
Specifications
Power supply: +9 to +35 VDC
Power consumption: 1.6 W
Insulation voltage: 3,000 VDC
Baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
Terminal: 10-pin, accepts AWG1-#12 to #24 wires
Dimensions (L×W×H): 4.80×2.79×0.87in (122mm×71mm×22mm)

ادامه مطلب

IFD8500

‧Converts from RS-232 to RS-422/485
‧Isolation in RS-485 channel (incl. power supply)
Converts from RS-232 to RS-422/485
Isolation in RS-485 channel (incl. power supply)
Specifications
Power supply: +9 to +35 VDC
Power consumption: 1.2 W
Insulation voltage: 3,000 VDC
Baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
Connector: 9-pin D-SUB (receptacle)
Terminal: 10-pin, accepts AWG1-#12 to #24 wires
Dimensions (L×W×H): 4.65×2.79×0.87in (118×71×22mm)

ادامه مطلب

IFD6530

‧A USB/RS-485 communication converter for C2000 series AC motor drive only
‧Offers 9V power supply
‧Supports keypad (KPC-CC01) for VFD series AC motor drive in conducting parameter storage and page editing in TPEditor software
‧Supports baudrate 75 ~ 115,200 bps
‧No external power supply required
‧Auto-detects the direction of data flow
‧A USB portable device
A USB/RS-485 communication converter for C2000 series AC motor drive only
Offers 9V power supply
Supports keypad (KPC-CC01) for VFD series AC motor drive in conducting parameter storage and page editing in TPEditor software
Supports baudrate 75 ~ 115,200 bps
No external power supply required
Auto-detects the direction of data flow
A USB portable device
Specifications
Power supply: No external power supply required
Power consumption: 0.6 W
Insulation voltage: 1,000 VDC
Baudrate: 75, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
USB connector: A type (plug)
RS-485 terminal: RJ-45 (8-pin)
Dimensions (L×W×H): 3.15×0.89×0.83in (80mm×22.5mm×21.2mm)

ادامه مطلب

IFD6500

‧A USB/RS-485 communication converter
‧Supports baudrate 75 ~ 115,200 bps
‧No external power supply required
‧Auto-detects the direction of data flow
‧A USB portable device
A USB/RS-485 communication converter
Supports baudrate 75 ~ 115,200 bps
No external power supply required
Auto-detects the direction of data flow
A USB portable device
Specifications
Power supply: No external power supply required
Power consumption: 0.4 W
Insulation voltage: 2,500 VDC
Baudrate: 75, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
USB connector: A type (plug)
RS-485 terminal: RJ-45 (8-pin)
Dimensions (L×W×H): 3.15×0.89×0.83in (80×22.5×21.2mm)

ادامه مطلب

RTU-485

‧Supports Modbus protocol
‧Connectable to 8 DVP-S series analog I/O modules
‧Connectable to 256 points of digital I/O modules
‧Max. baudrate: 115.2k bpsk
Supports Modbus protocol
Connectable to 8 DVP-S series analog I/O modules
Connectable to 256 points of digital I/O modules
Max. baudrate: 115.2k bpsk
Specifications
Transmission method: RS-485
Connector: 3-pin, removable
Serial baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
Data type: Modbus ASCII/RTU
Power supply voltage: 24 VDC (-15 to 20%)

ادامه مطلب

DVPSCM12-SL

‧PLC extension module to amplify signals for the left-side communication and support uploading and downloading of PLC program and parameters
‧Provides two stand-alone RS-485/RS-422 ports
‧Supports standard MODBUS protocol
‧Supports user-defined communication protocol
‧Fully isolates communication interfaces and highly capable in resisting interferences
PLC extension module to amplify signals for the left-side communication and support uploading and downloading of PLC program and parameters
Provides two stand-alone RS-485/RS-422 ports
Supports standard MODBUS protocol
Supports user-defined communication protocol
Fully isolates communication interfaces and highly capable in resisting interferences
Specifications
Transmission method: RS-485/RS-422
Connector type: Euro-type terminal blocks with feed-through terminals and spring plugs
Terminal resistors: built-in and changed-over by switches
Serial baudrates: 1,200、2,400、4,800、9,600、19,200、38,400、57,600、115,200、230,400、460,800 bps
Data type: Modbus ASCII/RTU、UD Link (user-defined communication protocol)

ادامه مطلب

DVP-FPMC

‧For DVP-PM series PLC only
‧Complies with CANopen DS301 V4.0.2 Sync, PDO, SDO and NMT
‧Supports 126 asynchronous axes in CANopen DSP402 V2.1 through SDO
‧Supports 4 synchronous axes in CANopen DS402 V2.1
‧Built-in commands to control Delta ASDA-A2 series servo system
‧PLCopen Like Function Block
For DVP-PM series PLC only
Complies with CANopen DS301 V4.0.2 Sync, PDO, SDO and NMT
Supports 126 asynchronous axes in CANopen DSP402 V2.1 through SDO
Supports 4 synchronous axes in CANopen DS402 V2.1
Built-in commands to control Delta ASDA-A2 series servo system
PLCopen Like Function Block
Specifications
Network Interface
Transmission method: IEEE 802.3, IEEE 802.3u
Baudrate: 10/100M bps
Transmission distance: 100m
CAN Interface
Message type: PDO, SDO, SYNC, Emergency, NMT
Connector: Removable, 5.08mm
Serial baudrate: 500k, 1M bps
Power consumption: 1.7 W
Insulation voltage: 500 V

ادامه مطلب

IFD9503

‧Supports CANopen protocol
‧Connectable to all Delta’s industrial automation products
‧Isolation in CANopen channel (incl. power supply)
‧Passed full compatibility test
Supports CANopen protocol
Connectable to all Delta@@s industrial automation products
Isolation in CANopen channel (incl. power supply)
Passed full compatibility test
Specifications
Transmission method: CAN
Electrical isolation: 500 VDC
Connector: Removable, 5.08mm
Transmission cables: 2 communication cables, 2 power cables, 1 shielded cable
Serial baudrate: 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
Power supply voltage: 24 VDC (-15 to 20%)
Current: 28 mA (typical), 125 mA impulse current (24 DC)

ادامه مطلب

IFD6503

‧A USB/CAN communication converter
‧Extracts CAN message (incl. standard & extended frames), decodes and displays following DeviceNet and CANopen protocols.
‧Filters by set conditions
‧Sends CAN messages, 1 message by manual mode, 8 messages by auto mode
‧Max. baudrate: 1M bps
‧A portable USB device
A USB/CAN communication converter
Extracts CAN message (incl. standard & extended frames), decodes and displays following DeviceNet and CANopen protocols.
Filters by set conditions
Sends CAN messages, 1 message by manual mode, 8 messages by auto mode
Max. baudrate: 1M bps
A portable USB device
Specifications
Power supply: No external power supply required
Power consumption: 0.6 W
Insulation voltage: 500 VDC
Baudrate: 10k, 20k, 50k, 100k, 125k, 250k, 500k, 800k, 1M bps
USB connector: A type (plug)
RS-485 terminal: RJ-45 (8-pin)
Dimensions (L×W×H): 3.15×0.89×0.83in (80×22.5×21.2mm)

ادامه مطلب

DVPCP02-H2

‧For DVP-EH2 series PLC only
‧Supports CANopen protocol
‧Max. baudrate: 1M bps
For DVP-EH2 series PLC only
Supports CANopen protocol
Max. baudrate: 1M bps
Specifications
Transmission method: CAN
Connector: Removable, 5.08mm
Serial baudrate: 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
Message type: PDO, SDO, SYNC, Emergency, NMT
Power supply voltage: 24 VDC (-15 to 20%)
Power consumption: 1.7 W
Electrical isolation: 500 VDC

ادامه مطلب