Modules

The CliQ II DIN rail modules series offers redundancy modules and buffer modules for the higher requirements of highly robust and stable systems.

Features & Benefits
Redundancy Modules:
Wide input and output range of 22-60VDC
Very wide operating temperature from -40℃ to +80℃
Built-in 2 channel DC OK signal and alarm relay contact
Supports N+1 Redundancy connection
Conformal coating on PCBA protects against chemical and dust pollutants
Hazardous Locations approval to ATEX and Class I, Div 2
IP20 Certified
Buffer Modules:
Minimum buffering time of 250ms @ 24V/20A
Flexible operating buffering voltage modes:
– Fixed mode at 22VDC
– Dynamic mode for Vin-1V
Charging time of < 30 seconds
Supports parallel connection to extend buffering time
Conformal coating on PCBA protects against chemical and dust pollutants
Hazardous Locations approval to ATEX and Class I, Div 2
Product List

Buffer Modules

 

 

Redundancy Modules

 

 

ادامه مطلب

Open Frame

The PJ Open Frame Power Supply series offers the most widely used output voltages of 12V and 24V with power ratings of 30W, 50W, 100W and 150W, and 48V with a power rating of 50W. These power supply units come with a universal AC input from 85VAC to 264VAC and wide operating temperature of -10°C to +70°C. The features include low leakage and low inrush current while the conformal coating on the PCBAs provides protection against dust and chemical pollutants. The PJ Open Frame Supply series is certified to EMC standards according to EN 55011 for industrial, scientific and medical (ISM) radio-frequency equipment; EN 55022 for Information Technology Equipment (ITE) radio-frequency equipment; EMS according to EN 55024. The PJ Open Frame Power Supply series also conforms to major international safety standards including IEC/EN/UL 60950-1 standards and is fully compliant with RoHS Directive 2011/65/EU for environmental protection.

Features & Benefits
Universal AC input voltage range
High PF > 0.97
Conforms to harmonic current IEC/EN 61000-3-2, Class A
Low inrush current / low leakage current
Conformal coating on PCBA to protect against chemical and dust pollutants
Versatile configuration options: Open Frame, L Frame, Enclosed
Remote ON/OFF option for selected models
Long life capacitors
PJ

ادامه مطلب

Panel Mount

The PMC and PMT series Panel Mount Power Supply products offer nominal output voltages of 4.2V, 5V, 12V, 24V and 48V with output power ratings from 15W to 600W. These single phase power supply units have a wide operating temperature range from -10°C to +70°C. The products come with versatile three connector options (Terminal Block, Front Face and Harness). The Panel Mount Power Supply products are fully compliant with RoHS Directive 2011/65/EU for environmental protection for selected models.

Features & Benefits
PMC Series:
Universal AC input voltage without power de-rating
Fully corrosion resistant Aluminum chassis
Conforms to harmonic current IEC/EN 61000-3-2, Class A (Except PMC-24V15W1A)
High MTBF > 700,000 hrs per Telcordia SR-332
Safety approval according to IEC/EN/UL 60950-1 (ITE standard) and EMI to EN 55022, Class B
Also Available: IP20 and Front Face connectors for selected models only
PMT Series:
AC input voltage selectable by switch (Universal AC Input voltage for selected models only)
Conforms to harmonic current IEC/EN 61000-3-2, Class A (For selected models)
High MTBF > 500,000 hrs per Telcordia SR-332
Versatile connector options:
– Terminal Block
– Front Face
– Harness
Product List

PMC

 

PMT

 

ادامه مطلب

DIN Rail

Delta’s DVP, CliQ, CliQ II, and Chrome series power supplies offer a nominal output voltage of 12V/24V, a wide temperature range from -20°C to +75°C and a minimum holdup time of 20ms. The state-of-the-art design is made to withstand harsh industrial environments.*Note: Product specifications are for reference only and may be different between models. Please refer to product manuals or product web pages for detailed information.

Category List

DVP

Chrome

 

 

CliQ

 

CliQII

 

ادامه مطلب